Yes, it is suitable for an RV. The electric fireplace can operate at temperatures as low as minus ten degrees. If the temperature is extremely low, the heater may start slowly.

The unit's standard voltage is 120V, and it requires a socket with a current of at least 15A.

Not at the moment. We are currently working on developing the WiFi functionality.

Please refer to the product manual for the installation guide. Here are the recommended space requirements for different sizes:

You could refer to the product manual to view the installation guides.

You can also contact customer service support@rwflame.com for help.

Please check this online product manual.

1. If the power switch on the top right corner is off, turn it on.

2. If the power switch is on and the switch light is on, but the fireplace still doesn't work, refer to the next steps.

3. If the power switch is on but the light is off:

• 3.1. Check if the socket has power and ensure the power cord is connected correctly.
• 3.2. If there are no issues with the power cord and socket, check the connection cable of the transformer and the motherboard.
• 3.3. If all above have no issues, but the light is still off, the motherboard might be broken. Contact support@rwflame.com for warranty support.

1. Verify if it's a battery issue. Replace the battery (CR2025) and see if it resolves the problem.

2. Open the back of the fireplace, check if the signal receiver in the fireplace is loose by following this video to inspect the receiver's status.

3. If you've tried above methods and the remote control still doesn't work, it may be damaged. If your fireplace is within the one-year warranty period, contact support@rwflame.com for a replacement remote. Otherwise, purchase a new remote control from the website.

Check if the connection line between the control panel and the fireplace is loose or disconnected. If the connection is secure and the issue persists, the control panel may be broken and needs to be replaced. Please contact support@rwflame.com for warranty support.

Turn off the power switch, wait for a while, and then turn it on again. If the problem persists, the motherboard might be broken and needs to be replaced. Please contact support@rwflame.com for warranty support.

Open the back of the fireplace, check if the light cable is properly connected to the motherboard. If the cable is secure and the issue persists, the light board may be broken and needs to be replaced. Please contact support@rwflame.com for warranty support.

Open the back of the fireplace, check if the cable connecting the motor to the motherboard is loose or disconnected. If the cable is secure and the issue persists, the motor may be broken and needs to be replaced. Please contact support@rwflame.com for warranty support.

Open the back of the fireplace and check the connection cable between the light board and the motherboard.

If the connection is secure but the flame color still won't change, the light board may be faulty and need replacement. Contact support@rwflame.com for warranty support.

This is the color gradient mode. Press "Color A" or "Color B" to switch the color modes.

1. If you hear a regular rattling sound, check if the reflective brush is touching the metal plate.

2. Open the back of the fireplace and check if the noise is coming from the motor. If it is, this indicates a motor failure, contact support@rwflame.com for warranty support.

3. Check if there is any foreign matter in the fan.

1. Open the back of the fireplace and check the connection cable between the fan and the motherboard.

2. If the connection is secure but there is still no airflow, adjust the fan by rotating the scroll wheel.

3. If these steps don't work, the fan might be broken. Contact support@rwflame.com for warranty support.

1. Open the back of the fireplace and check the connection cable between the heater and the motherboard.

2. If the connection is secure but there is still no heat, the motherboard might be broken. Contact support@rwflame.com for warranty support.

First, cut the cable ties and remove the acrylic support strips.

Then, unscrew the screws on the front of the fireplace and adjust the screen.

After adjustment, reinstall the screws.

There may be a short circuit. Please unplug the fireplace, open back of the fireplace, take a picture, and send it to customer service at support@rwflame.com.